DINTEK Cat 5e UTP Outdoor Cable With Gel 305m

DINTEK PowerPRO Category 5E 4 Pair Exterior (Industrial) UTP cable, has been designed to support high speed data transmission systems.

For Outdoor Above-Ground, Aerial or Conduit Duct Applications, this cable is part of the PowerPRO System range of products, that have been designed based on the PowerSum principle of crosstalk measurement and testing. We recommend that the full range of PowerPRO products is used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth. When combined as an end to end solution, the PowerPRO system, when installed by a certified installer can be warrantied for 25yrs.

Conductor : 24AWG Bare Solid Copper
Jacket : PE
Color : Black

Applications

• For Outdoor Above- Ground, Aerial or Conduit
• Duct Applications
• Voice
• ISDN
• 10Base T(IEEE 802.3)
• Fast Ethernet(IEEE802.3)
• 100Vg-AnyLAN(IEEE 802.12)
• Token Ring(IEEE 802.5)
• TP-PMD(ANSI X3T9.5)
• 100Base-T Ethernet(IEEE 802.3u)
• 155/622 Mbps ATM
• 1000Base-T
• 550 MHz Broadband video

Standards

• UL, ETL Verifi ed
• ANSI/TIA-568-C.2
• ISO/IEC 11801
• EN 50173

Cable Data

• Twisted pair color code: 
•             Pair 1> blue, white/blue ring. 
•             Pair 2> orange, white/orange ring
•             Pair 3> green, white/green ring
•             Pair 4> brown, white/brown ring
• Conductor: 24AWG (1x0.54 ± 0.007mm) solid Annealed copper wire
• Insulation material: HDPE
• Diameter of dielectric core: 1.03±0.05mm
• Insulation thickness: min AVG 0.245mm
• Number of twist pairs: 4 pairs
• Assembly: 4 pairs of dielectric core arranged in accordance with the structure figure.
• Waterblocking: Gel Filled Compound
• Material of jacket: PE
• Thickness of jacket: AVG 0.6 mm
• Nominal O.D.: Approx. 6.0 mm

Electrical Characteristics

• Impedance: 100 Ohm  15% 
• D.C.R (Max.) : 93.8 Ohm/100m at 20°C <24AWG>
• D.C.R. Unbalance (Max.) : 5% MAX./100m
• Temperature Rating : -40°C to 80°C
• Dielectric strength : DC 500V / 1min or AC 350V / 1min (Between wire and ground)
• Insulation Resistance: 1500 MOhm –Km  DC  500V (Between wire and ground)